Spyderco Dragonfly2 Lightweight, Orange, SP-C28POR2

Average rating:

3 reviews

SKU: SP-C28POR2

$78.75

Optional Services / Add-onsWant it to shave? - $5.00

Knife is sharpened to a razor edge. This service is done on a 2" x 72" Burr King and finished on a Baldor buffer using a leather wheel. Blades are kept cool so overheating is not an issue. Please keep in mind that items that receive this service are non-refundable. If you feel we have made a mistake, please contact us and we will make it right.

Bronze Heat Colored Existing Hardware - $15.00

Bronze Heat Colored Hardware Add-On - The knife is disassembled and a small amount of heat is applied to the hardware to change it to a bronze color. This includes any screws, spacers, lanyard tubes, or clips that are satin. Acid stonewashed clips will not be heat colored.

Acid Stonewash Blade / Clip (Satin ONLY) - $25.00

Acid Stonewash Blade / Clip (Satin ONLY) Add-On - Blades and satin finished clips (not coated) are acid stonewashed. Wire clips cannot be acid stonewashed. Sharpening is included with this add-on. Please allow 10 business days for completion.

Install All Black Hardware (Original Hardware Included) - $20.00

Install All Black Hardware Add-On - Gives your knife a completely blacked-out look. The satin hardware (stock) is changed out with our ALL black hardware, does NOT include pocket clip. The pocket clip will remain satin. We will also send the original hardware out with your order.

Laser Mark Your Knife - only $8.99

*Add-ons will delay shipment by 24-48 hours and are non-refundable (excluding installations).

Have Questions? Check out the Custom Mod and Add-On FAQ

BRANDSpyderco Knives

PRODUCT TYPEKnives

PRODUCT CATEGORYFolding

OVERALL LENGTH5.63"

CLOSED LENGTH3.33"

BLADE LENGTH2.3"

BLADE STEELVG-10

BLADE EDGEPlain

BLADE GRINDFlat

LOCKING MECHANISMBack Lock

HANDLE MATERIALFRN

ORIGINJapan

WEIGHT1.3 oz.

BLADE FINISHSatin

STEEL TYPEStainless Steel

MODELDragonfly

See more Spyderco Knives

Spyderco Knives: Spyderco Dragonfly2 Lightweight Knife, Orange, SP-C28POR2

The illustrated Spyderco Knife is the Spyderco Dragonfly2 Lightweight Knife that features a 2.28" leaf shaped blade made of VG10 stainless steel, .098" thick. The blade of this Spyderco Knife has a flat grind, a jimped choil and thumb ramp for secure grip, and the Spyderco hole for ambidextrous one hand opening. The contoured Safety Orange FRN (fiber reinforced nylon) handle, 3.33" closed, has patented Bi-Directional Texturing, Boye Dent lockback and a lanyard hole. A side to side reversible wire clip is mounted at the butt end of this Spyderco Knife. The Spyderco Dragonfly2 Lightweight Knife with Orange handle has an overall open length of 5.61" inches, and it weighs 1.3 ounces. Made in Japan.

Spyderco Knives: Spyderco Dragonfly2 Lightweight Knife, Orange, SP-C28POR2

Knives Plus ® Home

Average rating:

3 reviews

Write a review | Read all reviews

Featured Reviews:

Spyderco Dragonfly 2 11/13/2017
By Scotty
I purchased this knife to replace the Spyderco Delica knife I lost. I wanted another light weight Spyderco for everyday use. Although smaller than the Delica I lost, this knife seems to be just as useful. I was concerned about the wire clip after reading several reviews, however the wire the clip is made of is heavy and so far has performed well clipped in my blue jeans pocket. This time I went for orange, don't want to loose another knife.

Excellent EDC 11/02/2015
By Louie G
The blade came very sharp, as should be expected from Spyderco. It is a very light knife, excellent for everyday carry, and the pocket clip retains the knife very well in pocket. The spyderhole is very small, but the blade opens easily. The VG-10 steel touches up very nicely on Spyderco ceramics and holds an edge well.

Modified Dragonfly 2 03/26/2023
By Laird Williams
First modified knife ordered from Knivesplus, and they did not disappoint. The acid wash, blacked out hardware, and added sharpening choil make this gift for the son a real beauty, and personalized. Thanks Knivesplus!