Spyderco Endura 4 Lightweight, Flat Ground, SP-C10FPBK

Be the first one to write a reviewSKU: SP-C10FPBK

$102.38

Optional Services / Add-onsWant it to shave? - $5.00

Knife is sharpened to a razor edge. This service is done on a 2" x 72" Burr King and finished on a Baldor buffer using a leather wheel. Blades are kept cool so overheating is not an issue. Please keep in mind that items that receive this service are non-refundable. If you feel we have made a mistake, please contact us and we will make it right.

Bronze Heat Colored Satin Screws ONLY - $10.00

Bronze Heat Colored Screws ONLY Add-on - The knife is disassembled and a small amount of heat is applied to the hardware to change it to a bronze color. The pocket clip is left as is.

Bronze Heat Colored Screws & Acid Stonewash Clip - $15.00

Bronze Heat Colored Screws & Acid Stonewash Clip Add-On - The knife is disassembled and a small amount of heat is applied to the hardware to change it to a bronze color. The black paint is stripped off the pocket clip and acid stonewashed to match the blade. Everything is reassembled and tested for fit and finish.

Heat color screws and acid stonewash clip

Acid Stonewash Blade / Clip (Satin ONLY) - $25.00

Acid Stonewash Blade / Clip (Satin ONLY) Add-On - Blades and satin finished clips (not coated) are acid stonewashed. Wire clips cannot be acid stonewashed. Sharpening is included with this add-on. Please allow 10 business days for completion.

Laser Mark Your Knife - only $8.99

*Add-ons will delay shipment by 24-48 hours and are non-refundable (excluding installations).

Have Questions? Check out the Custom Mod and Add-On FAQ

BRANDSpyderco Knives

PRODUCT TYPEKnives

PRODUCT CATEGORYFolding

OVERALL LENGTH8.78"

CLOSED LENGTH4.98"

BLADE LENGTH3.8"

BLADE STEELVG-10

BLADE EDGEPlain

BLADE GRINDFlat

LOCKING MECHANISMBack Lock

HANDLE MATERIALFRN

ORIGINJapan

WEIGHT3.4 oz.

BLADE FINISHSatin

STEEL TYPEStainless Steel

MODELEndura

See more Spyderco Knives

Spyderco Knives: Spyderco Endura 4 Lightweight Knife, Flat Ground, SP-C10FPBK

The illustrated Spyderco Knife is the Spyderco Endura4 Lightweight Knife that features a 3.8" blade made of VG10 stainless steel, .118" thick. The blade of this Spyderco knife has a full flat grind, a notched thumb ramp and an enlarged hole for ambidextrous one hand opening. The Black FRN (fiberglass reinforced nylon) handle, 4.98" closed, has Bi-Directional texturing for maximum grip, skeletonized steel liners, a Boye dent lockback, and a lanyard hole. A side to side and end to end reversible black steel pocket clip is included with this Spyderco knife. The Spyderco Endura4 Lightweight Knife with flat ground blade and Black handle has an overall open length of 8.78", and it weighs 3.4 ounces. Made in Japan.

From The Spyderco Website: In 1990 Spyderco shook things up by introducing two knives, the Delica and Endura. First of their kind on the market, both folders opened up the knife market to lightweight performance, one-hand open pocket knives that just about everyone could afford. They settled as Spyderco's top two bestsellers and their improvement hasn't slowed since.

Spyderco Knives: Spyderco Endura 4 Lightweight Knife, Flat Ground, SP-C10FPBK

KNIVES PLUS ® Home